Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 11.001 SLD 3
SINGLE LINK AND PERFECT POWER TO WEIGHT RATIO OFFER EFFICIENT LOAD HANDLING
- More power on the hook due to Single Link
- Higher payloads due to intelligent lightweight design
- Maximum reliability due to PALTRONIC
- High degree of user-friendliness thanks to optional radio remote control
Brochures
PK 11.001 SLD 1 | PK 12.001 SLD 3 | PK 11.001 SLD 3 | PK 12.501 SLD 5
| Max. lifting moment | 10.3 |
| Max. lifting capacity | 5700 |
| Max. hydraulic outreach | 12.0 |
| Max. manual outreach | 15.9 |
| Slewing angle | 400° |
| Slewing torque | 1.3 |
| Fitting space required (std) | 0.72 |
| Width folded | 2.32 |
| Max. operating pressure | 330 |
| Pump capacity | 30 - 45 l/min |
| Dead weight (std.) | 1140 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Std | 10.3 mt | 5.8 m | 400 | 1.3 | 33.0 Mpa | 30-45 | 1140 kg | 2110 mm | 2400 mm | 720 mm | 5600 mm | - | 1840 kg |
| A | 10.0 mt | 7.8 m | 400 | 1.3 | 33.0 Mpa | 30-45 | 1250 kg | 2110 mm | 2400 mm | 720 mm | 7600 mm | - | 1280 kg |
| B | 9.7 mt | 9.9 m | 400 | 1.3 | 33.0 Mpa | 30-45 | 1350 kg | 2110 mm | 2400 mm | 720 mm | 9800 mm | - | 920 kg |
| C | 9.5 mt | 12.0 m | 400 | 1.3 | 33.0 Mpa | 30-45 | 1450 kg | 2110 mm | 2400 mm | 720 mm | 11900 mm | - | 680 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
